Setting The Clock; Tones - Kenmore 665.75775 Use & Care Manual

SETTING THE CLOCK
1.
Press CLOCK. PRESS
8
YOU SEE
2,
Set the time.
Press the "up" (A) or "down" (V) pad(s) until
the correct time shows on the display.
PRESS
HOUR MIN
®@
(example for 12:00)
YOU SEE
3,
Start the clock.
NOTES:
• If you do not want the clock time displayed,
press and hold CLOCK for 5 seconds. To
display the clock time again, press and hold
CLOCK for 5 seconds. You do not have to
reset the time.
• This is a 12-hour clock and does not
show a.m. or p.m.
PRESS
_15 SEC
ooQ
(example for 5:30)
YOU SEE
TONES
Keypad tones let you know a keypad has been 2, Timed oven control reminder tones
pushed. To shut off all keypad tones:
Press and hold STOP TIME for 5 seconds.
A short tone will sound to tell you the
tones have been changed. Repeat to turn
the tones back on. You will see "oFF" for
3 seconds when the tones are turned off and "on"
for 3 seconds when they are turned on.
Reminder tones are four 1-second tones which
remind you that the set time has expired for a
kitchen timer or a timed oven control function.
1.
Kitchen timer reminder tones
To remove the reminder tones, press and hold
SET for 5 seconds. To bring back the tones,
follow the same step. You will see "oFF"
when the tones are turned off and "on" when
they are turned on.
To remove the reminder tones, press and hold
COOK TIME for 5 seconds. To bring back the
tones, repeat this step. You will see "oFF"
when the tones are turned off and "on" when
they are turned on.
Error tones indicate a problem with the electronic
oven control. An error code will appear in the display.
See "Display Messages" in the "Troubleshooting"
section, p. 38.
Volume can be adjusted between high and low. To
adjust:
Press and hold DELAY START TIME for 5 seconds.
A short tone will sound to tell you the tones
have been changed. Either "HI" or "LO" will
appear on the time display for 3 seconds
to show the volume you chose.
12