Sealed Surface Burners And Cooktop - Kenmore 665.75775 Use & Care Manual

SEALED SURFACE BURNERS AND COOKTOP
1, Remove the burner cap from the
burner base.
2, Clean the burner cap with warm, soapy water
and a sponge. You can also clean it with a
mildly abrasive scrubbing pad or cleanser.
Do not clean the burner cap in a dishwasher or
self-cleaning oven.
3, If the gas tube opening has become soiled or
clogged, use a cotton swab or a soft cloth to
clean the area.
4.
If the ports are clogged, clean them with a
__.__ straight pin. Do not
enlarge or distort the
port. Do not use a
wooden toothpick. If
the burner needs to be
adjusted, call a quali-
fied technician for ser-
vice.
I
5, After cleaning the gas tube opening and ports,
replace the burner cap.
To replace the burner
cap, make sure the
alignment pins on the
cap are properly aligned
with the burner base.
,pening
6, Turn on the burner to see if it will light. If the
burner does not light
after you have cleaned it,
recheck cap alignment
or contact a Sears
Service Center. Do not
service the sealed burner
yourself.
33