Changing
the initial settings
3 To changethe "COUNTORY CODE" or
"LEVEL", press ENTER to bring up the
associatedpull-down menu while _ points
the appropriate item.
To select the item to be set, use A/v
when no pull-
down menu is shown.
4 UseA/v to select a desiredoption and press
ENTER.
Note that if you change the country
code, you must
reselect the Parental Lock level.
5 While _ points [PASSWORD], entera4-digit
passwordusingthe numericbuttons(0 to 9).
The password
entered in the above step becomes
the new password.
If you do not change the
password,
enter the same password
as in the step 2.
Even if you want to change only the country
code
and/or parental level, do not forget to enter the
password
after changing
the country
code and/or
parental level. Otherwise,
the new country code
and/or parental level will not become
effective.
6 PressENTER.
moves to [EXIT].
Pressing ENTER again returns to the "OTHERS"
page of the preference
display.
NOTES
• If you enter the wrong password more than 3 times in
step 2 above, [_3 moves to [EXIT] automatically and
A/v does not work.
• If you forget your password in step 2
Enter "8888." The current password is deleted and you
can set a new password.
Available
:
When you set the parental
level strictly, some discs may
not be played back at all. When you insert such a disc
and try to play it, the following
Parental Lock on-screen
display appears on the TV screen, asking you whether
you want the Parental Lock to be temporarily
released or
not.
ENTER_
G
C_.3 C_3
C_3 C_3
C_3
5d_Sd
C3_P_
ii,
,_ iiii
iiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiii
Numeric
buttons
A/V
Usethe A/v to move _ to [TEMPORARY
RELEASE],then press ENTER.
[_moves
to the [PASSWORD].
When selecting
[NOT RELEASE], press A (OPEN/
CLOSE) to remove the disc.
2 Enteryour 4-digit password using the numeric
buttons (0 to 9).
The Parental Lock is released, and the unit starts
playback.
If you enter the wrong
password,
"WRONG!
RETRY..." appears on the TV screen.
Enter the correct
password.
NOTE
• When you enter the wrong password more than 3 times
in step 2 above, 1_3moves to [NOT RELEASE]
automatically
and A/v do not work.
55
Need help?
Do you have a question about the XV-S5OOBK and is the answer not in the manual?