JVC XV-S5OOBK Instructions Manual page 28

Advanced operations
4 Specify tracks in the desired order using the
numeric buttons.
• To select a number between 1 and 10:
Press the corresponding button for the number.
• To select a number higher than 10:
Use the +10 button.
Examples:
To select 13: +10-_ 3
To select 34: +10 -_ +10 -_ +10 -_ 4
To select 40: +10 -_ +10 -_ +10 -_ 10
Up to 99 tracks can be programmed. You may
select the same track more than once.
The total program time is shown at the right top of
the program table.
The total program time
NO. Track
A_ E i
To clear the program
While stopped and the program table is shown on the
TV screen, press i.
All the programmed tracks are erased.
To exit the program mode
After clearing all programmed tracks, press ON
SCREEN.
The program table is dismissed and the status bar
appears on the TV screen.
The PROGRAM indicator in the display window
disappears and the unit quits program playback
mode.
NOTES
• During program playback, you cannot edit the program
contents.
• During program playback, pressing_ skip to the next
selection of the program. PressingI<< returns to the
beginning of the current selection.
• To dismiss the program table:
PressON SCREEN.The program table is dismissed and
the status bar is shown.
• To dismiss the menu bar (and the status bar):
PressON SCREEN.
5
Selected track number
If you specify a wrong track
Use A/_' to move [_ to the wrong track, then
press TVNIDEO - CANCEL. The track is erased
and the subsequent programmed tracks move up.
To clear the program while programming
Press i.
Press_,-to start program playback.
With a Video CD/SVCD disc, the program table is
automatically dismissed when the program
playback starts.
With an Audio CD disc, the program table remains
on the TV screen during program playback.
However, pressing the ON SCREEN button brings
up the status bar.
When all of the programmed tracks have finished
playback, the unit stops and the program table
appears again.
Note that the program remains.
To check the program contents
During playback, press 1. Playback stops and the
program table is shown.
When the unit is playing back an Audio CD and the
program table is not shown, you can bring up the
table by carrying out steps 1 through 3.
During Video CD/SVCD playback, you cannot see the
program table during playback.
To quit program playback
Press 1. Note that the program remains.
Available :
You can play tracks on a disc in random order by using
the random function.
ENTER
w_ TW we
CZ.3 _ C_3
_ c3_P25
ON SCREEN
ii, ,11
_ iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
• While stopped
Press ONSCREEN twice.
The menu bar appears on the TV screen.
(See page 35 for details about menu bar)
2 Use _/=,- to move I_ to .
(Screen example for Audio CD)
26