Direct Selection - JVC XV-S5OOBK Instructions Manual

Available :
_ iiiii i iii
c:_ _ _ Numeric 4b _
_ _ buttons
./!._ _ _TITLE//G aO u P
c_ c_ c_ c_
Jvl_
nM-SXVO08J
From the JPEG CONTROL display
• During JPEG CONTROL display is shown
1 Make sure that the black (cursor) bar is in the
left (Group) column.
If it is in the right column, press _ to move it to the
left column.
JPEG CONTROL
Group : 01 / 10 File : 01 / 06 [Total 28)
spd,g begonia,jpg
2
3
4
Move the bar to a desired Group using A/T.
On the right column, files in the selected Group are
shown.
When selecting a Group, file 1 is initially selected
(highlighted).
Selecta desiredfile using _/_.
Press_,-.
The slide show starts from the specified file.
JPEG disc playback
Direct selection
• During playback or while stopped
1
PressTITLE/GROUP.
"--" is shown in the Group display area of the
display window.
(Example for the indication of display window)
Group Current track
display area number
2
Use the numeric buttons to specify a desired
Group number.
• To select a number between 1 and 10:
Press the corresponding button for the number.
• To select a number higher than 10:
Use the +10 button.
Examples:
To select 13: +10-_ 3
To select 34: +10 -_ +10 -_ +10 -_ 4
To select 40: +10 -_ +10 -_ +10 -_ 10
Specify the Group number within several seconds
after pressing TITLE/GROUP (i.e. while the display
window shows "--" for the Group number, instead
of the current Group number).
3 Use the numeric buttons to specify a desired
Tracknumber.
You can specify the Track number according to the
order in the JPEG CONTROL display. You must
specify a Track number within 5 seconds after
carrying out step 2.
The unit starts slide show playback from the
specified Track. If you do not specify a Track
number, the unit starts slide show playback from
the first Track in the Group.
• You can skip a file in the slide show by using I_/_ or
A/T.
• You can select a file in the current group by using the
numeric buttons.
NOTES
• To stop slide-show playback (to dismissthe picture) in
the middle of the slide-show playback:
Press • or MENU.
The TV screen returns to show the JPEG CONTROL
display.
Pressing I_ resumes slide show playback from the last
picture you opened.
• To keep showing a current picture during the slide show
Press II or ENTER.
The picture does not change to the next picture.
Pressing I_ resumes the slide show playback from the
next picture.
• If a blackscreen appears continuously in the slide-show
playback:
The file currently played may be non-baseline JPEGfile.
In this case, select a playable file (a baseline JPEGfile)
again (e.g., pressing
• or MENU to open the JPEG
CONTROL display, etc.)
Note that it may take a long time to select another file.
45
'__i i" _/_ i_! i_i ?_i_i _iii iii