JVC XV-S5OOBK Instructions Manual page 18

Basic operations
Resuming playback
The unit can memorizes the position on a disc where you interrupt playback, and resume playback from that position later.
There are two resume modes (DISC RESUME and ON) you can set on the preference display. See page 52 for details
about how to set the resume mode.
• When purchasing the unit, the resume mode is initially set to "ON".
• You can deactivate the resume mode by setting "RESUME" on the "OTHERS" preference display to "OFF".
OPEN/CLOSE
ir .... ..........
iF ] _,
Disc tray AOPEN/CLOSE
Available :
• During playback
When the resume mode is set to "DISC RESUME"
Press1.
The unit stops playback and memorizes the interrupted position. After pressing •, the display window on the front
panel shows "----RESUME."
In this condition, a memory of the interrupted position is not cleared if you press & OPEN/CLOSE to open the disc
tray, or press STANDBY/ON (b/I (on the front panel) or DVD STANDBY/ON (D/I (on the remote control unit) to turn off
the unit,
• The position interrupted is also memorized by pressing • OPEN/CLOSE, STANDBY/ON _/I (on the front panel) or DVD STANDBY/
ON O/I (on the remote control unit). In this case, "----RESUME" is not shown on the display window.
• If you do not want the disc played to resume playback, press • while stopped.
• It memorizes positions for the last 30 discs.
• If you interrupt playback of a disc which you resumed playback, the memory is updated to store the new interrupted position.
• When the unit has already memorized positions for 30 discs, memorizing one more position for a disc automatically erases the
oldest memory. On the other hand, if you interrupt playback of a disc which an interrupted position is already memorized, the order
of memorized discs may change. In result, when memorizing a new data, the order of memorized discs to be erased also may
change.
When the resume mode is set to "ON"
Pressn.
The unit stops playback and memorizes the interrupted position.
In this condition, a memory of the interrupted position is not cleared if you press STANBY/ON (5/I (on the front
panel) or DVD STANDBY/ON (5/I (on the remote control unit)to turn off the unit,
Note that, if you press • OPEN/CLOSE to open the disc tray, the memory of the interrupted position is cleared,
• The position interrupted is also memorized by pressing STANBY/ON (5/I (on the front panel) or DVD STANDBY/ON (b/I (on the
remote control unit).
• If you do not want the disc played to resume playback, press • while stopped.
16