Operation And Adjustment - LIFESTYLER Expance 550 User Manual

OPERATION AND ADJUSTMENT
THE PERFORMANT LUBE
TM
WALKING BELT
Your treadmill features a walking belt coated with
PERFORMANT LUBE
TM,
a high-performance lubdcanL
IMPORTANT: Never apply all|cone spray or other
substances to the walking belt or the walking plat-
form. They will deteriorate the walldng belt and
cause excessive wear.
HOW TO PLUG IN THE POWER CORD
electric shock. This product is equipped with a cord
having an equipment-grounding conductor and a
groundiug plug. Plug the power cord into a surge
protector, and plug the surge protector Into an ap
propdate outlet that Is properly Installed and
grounded In accordance with all local codes and
ordinances.
This product is for use on a nominal 120-v01t circuit,
and has a grounding plug that looks like the plug Illus-
trated in drawing 1 below. A temporary adapter that
looks like the adapter illustrated in drawing 2 may be
used to connect the surge protector to a 2-pole recep-
tacle as shown in drawing 2 if a propedy grounded out-
let is not available.
The temporary adapter should be used only until a
propedy grounded outlet (drawing 1) can be installed
by a qualified electrician.
Your treadmill, like any other type of sophisticated
electronic equipment, can be seriously damaged by
sudden voltage changes in.your home's power.
Voltage surges, spikes, and noise Interference can re-
suit from weather conditions or from other appliances
being tumed on or off.
To decrease the pos-
sibltity of your tread- 1
mill being damaged,
always use a surge
grotector (not in-
cluded) with your
treadmill.
Surge protectors are
sold at most hardware
stores and department
stores. Use only a UL-
listed surge protector,
rated at 15 amps, with a
14-gauge cord of five
feet or less in length.
This product must be
grounded, if it should
malfunction or breal_
down, grounding pro-
vides a path of lea_ re-
sistance for electn_c cur-
rent to reduce the risk of
The green-colored dgid ear, lug, or the like extending
from the adapter must be connected to a permanent
ground such as a propedy grounded outlet box cover.
Whenever the adapter is used it must be held in place
by a metal screw. Some 2-pole receptacle outlet box
covers are not grounded. Contact a qualified elec-
trician to determine if the outlet box cover Is
grounded before using an adapter.
/Grounded Outlet Box
/Grounding Pin
"_unding Plug
_Grounded Outlet
e._l_Grounded Outlet Box
/Adapter
_) __Grounding Pin
Plug
• ge Protector
7