LIFESTYLER Expance 550 User Manual page 6

4. Withthehelpofa second person, carefully lower
the Left
and Right Updghts (t, 43) until the handrails are resting
on the floor.
4
Handrails¸
55
So
Attach six Base Pads (51) to the bottom of the Base (55)
In the indicated locations. Note: One extra Base Pad is
included.
See drawing 4 above. W'dhthe help of a second person,
raise the Left and Right Updghts (1, 43) until the Base
(55) is resting fiat on the fleer.
Before moving the treadmill, see HOW TO Move THE
TREADMILL on page 10.
6. Place the Wire Hamess (19) around the inner side of the
Base (55) as shown. Make sure that the Wire Harness is
out of the way. DO NOT feecl the slack Wire Hamess
into the Belly Pan (48). The Wire Hamess may be dam-
aged if it is inside the Belly Pan.
55
48
7. Remove the backing from the Adhesive Clip (16). Press
the Adhesive Clip onto the Rear Roller Cover (86) in the
Indicated location. Press the Allen Wrench (62) into the
Adhesive Clip.
Make sure that all parts are tightened before you use the
treadmill. Note: To protect the floor or carpet, place a
mat under the treadmill.
86