Table of Contents
Advertisement
ANTENNA CONNECTIONS
• Connecting an Indoor Antenna
Rod Antenna
300 to 75
ohm Adapter
75 ohm
Antenna Terminal
300 ohm flat wire
ohm Adapter
1. Insert a rod antenna into the mounting hole located on the upper side of the television.
Connect the 300 ohm flat wire to a 300 to 75 ohm antenna adapter.
2. Connect the 300 to 75 ohm antenna adapter to 75 ohm antenna terminal.
• Connecting
an Outdoor
Antenna
For the best reception, an outdoor antenna is
recommended.
Severely
weathered
antennas
and antenna
cables can reduce the signal quality.
Inspect
the antenna and cables before connecting the
TV set. A local service center can explain the
various outdoor antennas which are available
to you.
300 Ohm Flat Wire
1. Connect the 300 ohm flat wire to the screws
on the 300 ohm to 75 ohm adapter.
2. Push the end of 300 ohm to 75 ohm adapter
into 75 ohm antenna jack.
75 Ohm Coaxial Cable
1. Connect the 75 ohm coaxial cable directly to
the 75 ohm antenna jack.
Combination
VH F/U H F Antennas
300 ohm
Flat Wire
300 to 75
ohm Adapter
...-
\
75 ohm
\
75 ohm
Antenna
_
Coaxial
Jack
Cable
75 ohm
CATV Cable
• Connecting
a CATV Cable
If you subscribe to a CATV system, change the antenna connection as described below.
300 to 75 ohm Adapter
75 ohm CATV Cable
To CATV Distributor
1. Remove the 300 to 75 ohm adapter or the
2.
75 ohm antenna cable from the set.
5
Connect the CATV cable (75 ohm coaxial
cable) to the 75 ohm antenna jack.
Advertisement
Table of Contents
