PLAYBACK
• Playing Back a Prerecorded
Cassette Tape
1. Insert a prerecorded cassette into the tape compartment. The
VCR automatically turns on.
:
30
2. Press the PLAY/x2 (_.))
button.
The message AUTO TRACKING
flashes for 4 seconds.
Do not select the tape speed for playback. This will be done
automatically.
PLAY
IIIIIIIIIIII..
'tqUTO
TRACKING
-
"111|11111111"
3. Press the STOP/EJECT
button
on the front
panel
or
STOP ( @ ) on the remote control to stop playback.
STOP
Notes: • This unit has automatic rewind. At the very end of the tape, the set automatically stops
and rewinds the tape.
• To eject the cassette,
press the EJECT
(_)
button
on the remote
control
or
STOP/EJECT twice on the front panel.
You may prevent accidental erasing of a tape by removing the
safety tab on the back edge of the cassette.
If you decide to
record on the tape again, cover the hole with cellophane tape.
•
To prevent
accidental
erasure,
break
off the tab with a
screwdriver as shown on the right.
Safety tab
To record again, cover the hole with cellophane
tape as
shown right.
21
/J I Cellophane
tape