Using Clock Count/Remain - Goldstar GCV1946M Owner's Manual

PLAYBACK VARIATIONS
• Using CLOCK COUNT/REMAIN
This function allows the remaining tape time to be displayed during recording or playback while in
counter mode.
1. Press the MENU button on the remote control until the
picture menu is displayed as shown on the right.
2. Press the CHANNEL • or • button to select
TAPE
TIMER
PROGRAM
TAPE REMAIN
RENTAL POSITION
Use _ and •
REMAIN
.
Press the • (ENTER) button.
The TAPE REMAIN mode is displayed as shown right.
TIMER
PROGRAM
TAPE REMAIN
RENTAL POSITION
Use _ and •
4. Press the VOL • or b, button to select NORMAL or TI60
T-160: Set to this position for using a T-160 or T-140 tape
only.
NOR: For the others, set to this position.
5. Press the • (ENTER) button.
6. Press the CLOCK CNT/REMAIN button.
The display switches each time the button is pressed.
• Counter changes to clock when the cassette is ejected.
• The tape counter shows the tape travel time in hours,
minutes and seconds during recording or playback.
TAPE REMAIN
NORMAL
Use 4) and •
IO:30AM
i
V
1:10:30
V
The tape remaining time functions with "1"-20, 3 0, 40, 60,
80, 90, 100, 120, 140, 160, and 180 tapes only.
25
REM 1:30