Table of Contents
Advertisement
INSTANT TIMER RECORDING
This function is convenient when, for example, you want to set the VCR to sta_rtrecording instantly
without going through the whole timer setting procedure.
Notes: • Make sure that the clock is set correctly before you activate Instant Rmer Recording.
• During Instant Timer Recording, you cannot change the channel on the TVCR.
1. Insert a cassette.
The TVCR automatically turns on.
2. Press the TVIAV button so that a channel number appears.
3. Press the REC-SPEED button to select the recording speed,
SP or EP.
.
.
.
Select the desired channel
number with the NUMBER
or
CHANNEL A/V
buttons.
If you try to select the Cable TV channel, first select CABLE
in INPUT
mode (refer to "Selecting
the Input Signal"
on
page 12).
Press the RECIITR (O)
button twice to preset the recording
time which appears on the screen.
Each time you press the REC/ITR ( O ) button, the time
length advances in 30-minute increments up to 9 hours.
Press the POWER button on the remote control to put into
standby mode.
The VCR starts recording, then stops at the preset time
period.
SP
ITR
AIR
89
REC
TIME
4:00
Notes: • To extend the Instant Timer Recording time, press the REC/ITR (O)
button to advance
the recording time in 30-minute increments,
To clear the Instant Timer Recording setting repeatedly press the REC/ITR (O)
until the
display reads 0..00.
If the tape runs out during Instant Timer Recording, recording will stop and the tape will
be ejected.
To recall the Instant Timer Recording setting, press the REC/ITR ( O ) button once. The
recalled ITR setting automatically returns to the original screen after 15 seconds.
33
Advertisement
Table of Contents
