Vhs Index Search System (Viss); Marking Viss Signals; Playing Back From The Viss Point; Locating The Desired Program (Viss Search) - Goldstar GCV1946M Owner's Manual

VHS INDEX SEARCH SYSTEM(MISS)
MISS signal marks on the tape let you scan through the start of different programs or search for a
specific section of tape.
• Marking MISS Signals
Automatic VISS Mark
A MISS signal is automatically marked at the beginning of
recording.
• Playing Back from the VISS Point
The beginning of each program can be found and played back by using the VISS signals.
1. Insert a cassette with MISS signals.
2. Press the MISS button once during playback.
V_S O0 appears on the screen.
i_: ¸ i
_zss oo
U.SCAN 04
.
Press either the REW/(_) or FF/(]_ button to start the MISS
scan.
The tape rewinds or rapidly advances to the next marked
signal.
The tape plays back for about 5 seconds, then rewinds or
rapidly advances to the next VISS signal. Each time VlSS
signal is detected and playback begins, the VISS scan
number (V.SCAN 04) appears.
4. When the desired program is detected, press the
PLAY/x2 (C)) button.
Playback starts from that point.
• Locating the Desired Program (VISS Search)
A particular program can be located and played back by designating how many MISS signals
ahead or behind that program is from the current position.
1. Insert a cassette with MISS signals.
!_i! !
UISS O0
U.SEARCH 03
2. Press the MiSS button.
V]SS O0 appears.
.
Using the NUMBER buttons, enter the number of MISS
signals you want to skip.
For example, if the tape is at VISS 02 and you want to locate
VISS 05, press 0 3.
.
Press either the REW/!_] or FF/(]_) button.
V.SEARCH 03 appears on the screen.
When the desired signal is found, playback begins
automatically.
34