Checking The Program Timer Settings - Goldstar GCV1946M Owner's Manual

PROGRAM TIMER RECORDING
• Checking the Program Timer Settings
You can display all of the timer settings on the TVCR screen to check the settings
1. Press the MENU button on the remote control until the
picture menu is displayed as shown on the right.
TIMER
PROGRAM
TAPE REMAIN
RENTAL POSITION
Use _ and •
2. Press the CHANNEL • or • button to select PROGRAM.
TIMER
PROGRAM
TAPE REMAIN
RENTAL POSITION
Use _ and •
3. Press the • (ENTER) button.
The PROGRAM mode is displayed.
4. Press the • (ENTER) button again to return to the original
screen.
8/31/1995
THU
IO:30AM
D_ITE STRRT STOP CH
IO/_T
10:31N5
il:dOR5 14 EP
12/101 8:00Pfl 9:00_ lO ff_
13/111E B:OOR4 SIOOR_ 10
I?._T 9zSORI 10:50RI
$ SP
20/TLE 7:00RI 9JOOPM 3e EP
Use • _ k and •
Notes: • The REC. TIMER indicator will not light while your TVCR is ON even if you have already
programmed the Timer recording, but it will blink when it's near to the programmed start
time.
PROGRAMMED TIMER RECORDING will not start while your TVCR is ON even if it's
programmed start time.
During setting the program timer, when cassette tape is ejected, the REC TIMER
indicator blinks even if the power is turned off.
31