Auto Off Function; Setting The Sleep Timer - Goldstar GCV1946M Owner's Manual

TIMER FUNCTIONS
• AUTO OFF Function
This function automatically turns off your "IV after 10 minutes when there are no broadcasts. If the
VCR is operating, the AUTO O]L_1 ' does not function.
0tqTE 12/30/1995 S_qT
11=30PR
OFF 12=00PR HOLD
10=00_lq 10 RUN
" NTI'0 0FrtHOL0
Use 4_) and •
1. In the TIMER mode, press the CHANNEL • or • button to
select AUTO OFF.
.
Press the VOL • or I_ button to select the HOLD or RUN
option.
3. Press the CHANNEL • or • button to select RUN or HOLD.
4. Press the • (ENTER) button twice.
• Setting the Sleep Timer
This function automatically turns off your TV after the time you set.
SLEEP "--
Press the SLEEP TIMER button to select the desired sleep time.
Each time you press this button, the sleep time is displayed one
by one on the top right-hand corner of the screen as shown
below.
--_"_ ----='-180 -_ 120 _ 90 _ 60 -_ 30 -_ 20 -_ 10
Notes: • After 3 seconds, the selected sleep time will disappear and be operated automatically.
• To view the remaining sleep time, press the SLEEP TIMER button once and the
remaining sleep time will be displayed.
• To erase the sleep time, select the ST-_-EP --- mode by using the SLEEP TIMER button.
20