Timer Functions; Setting The Current Time - Goldstar GCV1946M Owner's Manual

TIMER FUNCTIONS
• Setting the Current Time
Before setting the ON/OFF Time, first you should set the current time.
TIMER
PROGRAM
TAPE REMAIN
RENTAL POSITION
Use _ and •
1. Press the MENU button on the remote control until the picture
menu is displayed as shown on the left.
2. Press the CHANNEL • or • button to select TIMER.
NZ=_qM
OFF Nz-.-_fl RUN
ON _==--##I 03 Rt,A_
_n'0 0FIFzNOLD
Use 4_) and •
"_ I;_T1E 12/29/1995 FRI
01:00_t
ON _:=_t 03 RUN
nUT0 0FF :l_l.g
Use 4_P and •
3. Press the • (ENTER) button.
The TIMER mode is displayed and DATE is indicated as
shown on the left.
.
5.
Press the VOL • or • button to select the month option.
Repeatedly press the CHANNEL • or • button to select the
month. The day of week automatically changes with the
month.
6. Press the VOL • or • button to select the date.option.
.t I)_TE 12/31/1_3
01:00_
OFF _:--_ RUN
1_4 _=--._'I 03 RIM
NJTO OFF:HOLD
Use 4_ and •
7. Repeatedly press the CHANNEL • or • button to select the
date. The day of week automatically changes with the date.
8. Press the VOL • or • button to select the year option.
-_ ORTE 12/30/1995 5AT
01:00RR
OFF I:--RR RUN
ON _l--_H 03
AUTO 0FT:H0_
Use • _ • and •
9. Repeatedly press the CHANNEL • or • button to select the
year. The day of week automatically changes with the year.
10.Press the VOL• or • button to select the hour option.
-0DRTE 12/30/1995 SAT
II:00PM
OFF -- :"_M RUN
054 N:"-P_ 03 RUN
RUTO 0_ :HOLO
Use 4 _ • and •
i_TE 12/30/1995 SAT
11:30PR
OFF --:--Nt RUN
ON --:--Nt 03 RUN
AUTO OFF:HOLD
Use 4 _ _ and •
11. Repeatedly press the CHANNEL • or • button to select the
hour.
12.Press the VOL • or • button to select the minute option.
13.Repeatedly press the CHANNEL • or • button to select the
minute.
14.Press the • (ENTER) button twice.
18