Tracking Control; Rental Position - Goldstar GCV1946M Owner's Manual

PLAYBACK
• Tracking Control
When playing back a tape recorded on another VCR, there might be some picture noise.
Tracking ensures that the tape is correctlyalignedwith the playback head. It only works in the "playback"
mode and itsprinciplepurpose is to minimize picture shake.
It can be adjusted either automatically or manually.
Automatic Tracking Adjustment
lll{t|ll "_
When playback starts, the auto tracking automatically adjusts
the picture.
AUTO TRACKING flashes for 4 seconds.
If auto tracking does not work, the tracking was probably last
adjusted manually.
Manual Tracking Adjustment
When the playback picture proves to have streaks or snow during normal playback, adjust the
picture manually with the AUTO TRACKING V(DOWN)/A(UP) buttons.
Press either AUTO TRACKING v(DOWN) or a(UP) button to obtain the best possible picture.
When playing back a tape recorded on another VCR, the tracking condition is automatically
adjusted on this VCR.
Notes: • Auto tracking adjustment may be impossible when the recording condition of the tape is poor.
• During auto tracking adjustment, streaks or noise may appear.
• Rental Position
When playing back rental tapes, there will be some picture noise. In the RENTAL POSITION ON
condition, the image details may be better defined thanks to the vertical enhancer.
1. Press the MENU button on the remote control until the
picture menu is displayed as shown left.
TIMER
PROGRAM
TAPE REMAIN
RENTAL POSITION
Use _ and •
TIMER
PROGRAM
TAPE REMAIN
* RENTAL POSITION
Use _ and •
RENTAL POSITION
ON
Use 4_ and •
2. Press the CHANNEL • or • button to select RENTAL
POSITION.
3. Press the • (ENTER) button.
The RENTAL POSITION mode is displayed.
4. Press the VOL • or • button to select ON or OFF.
5. Press the • (ENTER) button.
22