Changing Or Cancelling The Program Timer Settings - Goldstar GCV1946M Owner's Manual

PROGRAM TIMER RECORDING
• Changing or Cancelling the Program Timer Settings
TIMER
PROGRAM
TAPE REMAIN
RENTAL POSITION
USG _ and •
1. Press the MENU button on the remote control until the menu
is displayed as shown on the left.
TIMER
4 PROGRAM
TAPE REMAIN
RENTRL POSITION
Uso _ and •
2. Press the CHANNEL • or • button to select PROGRAM.
8/31/1995 THU lO=30AM
OATE STRRT STOP 0t OP
* lOi_f IOs31M II:40PM 14
12/'f_ 8100_ S=00Rt 10 IIm
13/NE 8:00_ SeOORI 10 I_
I?/MT $:50Rt 10150P_ 8 SP
Use (_) and
•
3. Press the • (ENTER) button.
The PROGRAM mode is displayed as shown on the left.
8/31/1995 THU IO=30AM
OCITE START STOP CH
10i_T 10=31M lls4ORt 14 EP
I2/R_
8=00Rt
9=00m
10 II_
]3/_UE 8:00RI 9=00RI 10
17/_T 9150R_ IO:50PN B 5P
20/]UE ?=OORt 9=00RI 38 EP
Use 4_• and •
.
o
Press the CHANNEL • or • button to move the cursor to
the program you wish to change or cancel.
To change it, flash the item to be changed by pressing the
VOL • or • button and make the required changes by
pressing the CHANNEL • or • button.
To cancel it, move the cursor to the item to be cancelled by
pressing the CHANNEL • or • button, press the VOL •
button to select the ]BATE position then press the CLEAR
button.
6. Press the • (ENTER) button twice to return to the original
screen.
32