Selecting The Input Signal; Memorizing Channels - Goldstar GCV1946M Owner's Manual

BASIC TV OPERATION
• Selecting the Input Signal
* INPUT
RUTO CH SERRCH
CH RDD/ERRSE
CRPTIOH
LRNGURGE
RUTO REPERT
Use _ and •
1. Press the MENU button until the picture menu is displayed as
shown left.
2. Press the CHANNEL • or • button to select the INPUT.
3. Press the • (ENTER) button.
The INPUT mode is displayed as shown left.
INPUT RIR 04
Use 4, and •
,
Press the VOL < or • button until the desired input signal is
displayed.
Each time you press the VOL • button the input signal is
displayed one by one as shown below.
-_ INPUT AIR -_ INPUT CABLE -_,- INPUT AV ....
i
5. Press the • (ENTER) button to enter the selected input
signal.
• Memorizing Channels
This function memorizes all the active channels in your area before you can use the TVCR.
There are two ways of memorizing channels. One is AUTO PROGRAM and the other is MANUAL
PROGRAM.
In AUTO PROGRAM the TV will memorize the channels in ascending order. If there are additional
channels you want to add or erase, you can manually add or delete those channels.
Neither AUTO nor MANUAL PROGRAM operate the video mode. Therefore in AUTO CH
SEARCH and CH ADD/ERASE is not displayed in the AV mode.
The AIR or CABLE mode must be selected first.
12