Table of Contents
Advertisement
PROGRAM TIMER RECORDING
• Setting the Program Timer
You can preset up to five recordings up to one month in advance. The recordings can be preset
with the remote control while referring to the PROGPJ_M display on the screen.
Before you begin, check the following points.
•
The date and clock must be set correctly.
•
Make sure that the cassette tape is long enough to record all the programs.
•
Make sure that the safety tab on the cassette is not broken off.
Recording from today to one month later
If today is August 31st, you can set the program timer to record a program broadcast between
today and September 30 (for 31 days). If today is January 31 st, you can set the program timer to
record a program broadcast between today and February 28th (for 29 days). A leap year is
automatically considered.
1. Press the MENU button
on the remote control
until the
picture menu is displayed as shown on the right.
2. Press the CHANNEL • or V button to select PROGRAM.
_TIMER
PROGRAM
TAPE
REMAIN
RENTAL
POSITION
Uso
_
and
•
3. Pressthe
• (ENTER) button.
The PROGRAM
mode is displayed as shown on the right.
4. Press the VOL • or • button to select the DATE position.
5. Repeatedly press the CHANNEL •
or •
button to select the
date.
Each time you press the CHANNEL
•
button, the date
changes one by one as shown below, if the set date is 31/WED.
31/THU --_
I/FRI --_ .... --_ 30/SAT
The CHANNEL
•
button displays the date one by one as
shown below, if the set date is 31/WED,
31/THU
--_
EVERY DAY
--_
EVERY SUN
EVERY SAT _
-.- _
EVERY MON
6. Press the VOL • or •
button to select the hour option for
START.
7. Press the CHANNEL
•
or •
button to select the hour for
START.
TIMER
PROGRAM
TAPE
REMAIN
RENTAL
POSITION
Use
_
and
•
8/31/1995
THU
IO=30AM
DATE
ST_T
STOP
CH
_/_
-=---M
-1--_
_
IltlO
Use
4 _
and
•
8/31/1995
THU
IO=30AM
DATE
STN;tT
STOP
CH
Use
• _
P
and
•
8/31/1995
THU
IO:30AM
DATE
START
5T[_°
CR
--/_
-=--_
-:--_
--
_JTO
--/--
-=--_
-:--_
--
#JTO
29
Advertisement
Table of Contents
