Selecting Channels; Adjusting The Volume; Recalling The Current Tv Mode - Goldstar GCV1946M Owner's Manual

BASIC TV OPERATION
• Selecting Channels
G
_ii_iiii_ _,
_!ii?i_ I
Press the CHANNEL ,&/V buttons to conveniently select the
channel higher or lower than the channel being viewed, or
NUMBER buttons to directly select the desired channel.
The selected channel number appears as shown left. After 3
seconds the channel number disappears.
• Adjusting the Volume
VOLUME 20
m
Press the VOL • button to increase the volume level or VOL 4
button to decrease the volume level.
To mute the sound, press the MUTE button.
The word MOTE is displayed on the left lower side of the screen.
To restore the sound, press the MUTE button again or the VOL
4/• buttons.
MUTE
• Recalling the Current TVCR Mode
ISTOP 30
SP
11/30/1995 THU IO:30AM
When you press the • (ENTER) button once, the current time,
operation mode, tape speed and channel number appear as
shown left.
Notes: •
The current time is displayed only when the current
time has been set in TIMER function.
If there is no tape in your TVCR the operation mode
is not displayed.
12:30RH
Press the • (ENTER) button again to view the current time.
14