To Disable A Transmitter Linked To Memory - Jeep Automobile Owner's Manual

mirror, and the pedals stop moving. A delay of one
second will occur before another recall can be selected.

To Disable A Transmitter Linked to Memory

1. Turn the ignition switch to the OFF position and
remove the key.
2. Press and release memory button number 1. The
system will recall any memory settings stored in position
1. Wait for the system to complete the memory recall
before continuing to step 3.
3. Press and release the memory SET (S) button located
on the driver's door.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 109
4. Within 5 seconds, press and release memory button 1
on the driver's door.
5. Within 5 seconds, press and release the "Unlock"
button on the Remote Keyless Entry transmitter.
To disable another transmitter linked to either memory
position, repeat steps 1-5 for each transmitter.
NOTE: Once programmed, all transmitters linked to
memory can be easily enabled or disabled at one time.
Refer to Remote Linked to Memory under Customer
Programmable Features in the Electronic Vehicle Infor-
mation Center (EVIC) for more information.
3