Table of Contents
Advertisement
Model 3196RC T-DAC User Manual
DSX1 line loop (dsxLineLoop)
When activated, data received at the selected T1/E1 port, is looped back to the originating device (see
figure
56). Data is looped at the T1/E1 port.
To activate line loop, do the following:
Modify Configuration
1. Click on the
2. Locate the
Loopback Configuration
3. Select
LineLoop
and click on the
To deactivate payload loop, set the
button on the right.
Submit Query
Note
Periodic maintenance
Consult the rack chassis user manual for information on preventative maintenance (such as cleaning the chassis
air cooling vents to remove accumulated dust).
Calibration
The Model 3196RC requires no calibration.
Periodic maintenance
Figure 56. Line Loop
link of the T1/E1 port to be placed under test.
drop down menu
Submit Query
Loopback Configuration
Refer to the Administration Reference Guide for descriptions of yellow
alarms and send codes.
5 • Troubleshooting and maintenance
3196RC
button on the right.
drop down menu to
T1/E1 port
NoLoop
, and click on the
78
Advertisement
Table of Contents
