Table of Contents
Advertisement
Model 3196RC T-DAC User Manual
9. Connect the male end of the 3196RC T-DAC' power cables to the power outlets.
10. Boot up information will display on your HyperTerminal connection window, eventually followed by a
login request window (see
11. For the user name, type
12. For the password, type
figure
20).
13. Type
for System, then press
k
14. Under System, type
15. Enter
g
for LAN Address, then press
16. Type your LAN IP address followed by pressing <Enter>.
17. Press the left-arrow cursor key on your keyboard to return to the previous screen.
18. If you do not need to change the LAN Mask from the default of 255.255.255.0, go to step 21. Otherwise,
press
and type the new LAN Mask in the same manner as when entering a LAN IP address.
h
Initial configuration through the RS-232 control port
figure
19).
Figure 19. Login window
.
superuser
; the TOP LEVEL MANAGEMENT window then appears (see
superuser
Figure 20. VT-100 Top Level Management window
.
<Enter>
1
for Details, then press
<Enter>
3 • Configuring the T-DAC for operation
<Enter>
.
.
40
Advertisement
Table of Contents
