Connecting The Cables - Panasonic DP-8025 Operating Instructions Manual

Safety Information

Connecting the Cables

ACTIVITY Lamp
Blinks when there is data traffic
on the LAN.
LAN Connection Jack
(10Base-T/100Base-TX)
LAN Cable
(10Base-T/100Base-TX Cable)
Insert the plug until a click is heard.
(LAN cable is not included with the product.)
Purchase a Category 5 Cable, compliant with
EIA/TIA 568-A-5 standard.
Ethernet-Token-Ring
Bridge
(Optional Order
No. UE-204006)
10Base-T/100Base-TX Ethernet Hub
12
External Telephone Jack
You can connect an
additional standard single
line telephone to the
machine. To connect the
telephone, remove the
protective tab on the TEL
jack.
Telephone Line Jack
Plug one end of the
telephone line cable into
the "RJ-11C" telephone
jack supplied by the
telephone company, and
the other end into the LINE
jack on the left side of the
machine. (Refer to the Dialing
Method, see pages 175, and 190)
RX
LINK
LINK Lamp
Illuminates when connected to the LAN.
Lamp will not turn ON if LAN cable
is defective
(contains breaks).
Ethernet LAN
(10Base-T/100Base-TX)
Cable (Not included)
Power Switch
After connecting all cables,
and the Power Cord, turn the
Main Power Switch on the Back,
and the Power Switch on the Left Side
of the machine to the ON position.
RJ-11C
Telephone Jack