Connecting The Cable - Panasonic Workio DP-180 Operating Instructions Manual

LINK Lamp
Illuminates when connected to the LAN.
Lamp will not turn ON if LAN cable is defective
(contains breaks).
LAN Connection Jack
(10Base-T/100Base-TX)
LAN Cable
(10Base-T/100Base-TX Cable)
Insert the plug until a click is heard.
(LAN cable is not included with the product.)
Purchase a Category 5 Cable, compliant with
EIA/TIA 568-A-5 standard.
10Base-T/100Base-TX Ethernet Hub
Optional Telephone Handset Jack
Connect the telephone line cable from the
Optional Handset into the HANDSET jack
on the back of the machine.
External Telephone Jack
You can connect an additional standard
single line telephone to the machine.
To connect the telephone, break off the
protective tab on the TEL jack.
Telephone Jack
NOTE
16
Getting To Know Your Machine

Connecting the Cable

Ethernet LAN Cable
(10Base-T/100Base-TX)
(Not included)
1. For some countries, the handset may not be available because of the country's regulation or
specification.
2. The shape of the telephone line cable and power cord may differ depending on each country's
regulation or specification.
3. The Telephone Line Cable Adapter is available in certain countries only.
ACTIVITY Lamp
Power Switch
Telephone Line Jack
Telephone Line
Cable Adapter
Blinks when there is data traffic
on the LAN.
Optional Handset Kit
(UE-403172)
After connecting all cables and
Power Cord, turn the Power Switch
on the Left Side of the machine
to the ON position.
Plug one end of the telephone
line cable into the telephone jack
supplied by the telephone
company and the other end into
the LINE jack on the back side of
the machine.
(Refer to the Dialling Method.
See page 128.)