Panasonic DP-8025 Operating Instructions Manual page 194

Customizing Your Machine
Fax Parameter Table
* = Factory default setting
No.
144 EMAIL Character Set
145 Sender Selection
146
147 Auto POP Receive
148 Del POP Receive Mail
149 Del POP Error Mail
150 Ifax Return Receipt
151 EMAIL Header FMT
152 Sub-Addr Routing
153
154 Route Header FMT
155 Print Routed Doc
156 Print Forward Doc
157 Transaction JRNL
194
Parameter Setting
Japanese
*English
*Invalid
Valid
POP Timer 0 to 60 min.
Invalid
*Valid
Invalid
*Valid
*Invalid
Valid
Invalid
*Valid
All
S/F/T
Off
*Invalid
Valid
TSI Routing *Invalid
Valid
*Originator
Relay
Station
*Inc. only
Always
*Inc. only
Always
*Invalid
Valid
Selecting the Character Set when receiving, or sending email text.
Selecting a pre-programmed sender's name, and email address before
each transmission.
Setting the time interval for the machine to check for email on the POP
Server.
(0 = Does not check the POP Server for email.)
Selecting whether the machine automatically downloads an email from
the POP Server.
Selecting whether the email will be deleted automatically after retrieval
from the POP Server.
Selecting whether to delete the email that includes an incompatible file
attachment from the POP Server.
Selecting whether to send a return receipt when receiving from another
Panasonic Internet Fax.
Selecting the header information to print when an email is received.
(Normally used for Troubleshooting. It shows the path of the email
transmission before arriving at your machine.)
Selecting whether to automatically route a received fax, or email using
ITU-T sub-address.
Selecting whether to route a received fax to a telephone number, or an
email address preprogrammed in the Address Book using the
originating fax's Numeric ID (TSI frame information).
Selecting the type of email header to be included in the "From" field of
each routed fax.
Originator : The originating fax machine's TSI will appear in the
"From" field of the routed email.
Relay Station : The routing station's email address will appear in the
"From" field of the routed email.
Selecting whether a received fax to be routed is always printed, or only
when the routing operation fails.
Selecting whether a memory received fax, or email to be forwarded is
always printed, or only when forwarding is incomplete.
Selecting whether the machine sends a transaction journal to the
pre-programmed email address.
Comments