Connecting The Cable - Panasonic Workio DP-190 Operating Instructions Manual

LINK Lamp
Illuminates when connected to the LAN.
Lamp will not turn ON if LAN cable is defective
(contains breaks).
LAN Connection Jack
(10Base-T/100Base-TX)
LAN Cable
(10Base-T/100Base-TX Cable)
Insert the plug until a click is heard.
(LAN cable is not included with the product.)
Purchase a Category 5 Cable, compliant with
EIA/TIA 568-A-5 standard.
10Base-T/100Base-TX Ethernet Hub
Optional Telephone Handset Jack
Connect the telephone line cable from the
Optional Handset into the HANDSET jack
on the back of the machine.
External Telephone Jack
You can connect an additional standard
single line telephone to the machine.
To connect the telephone,
break off the protective tab on the TEL jack.
RJ-11C
Telephone Jack
16
Getting To Know Your Machine

Connecting the Cable

Ethernet LAN Cable
(10Base-T/100Base-TX)
(Not included)
ACTIVITY Lamp
Blinks when there
is data traffic
on the LAN.
Optional Handset Kit
(UE-403171)
Power Switch
After connecting all cables and
Power Cord, turn the Power Switch
on the Left Side of the machine
to the ON position.
Telephone Line Jack
Plug one end of the telephone
line cable into the telephone
jack supplied by the telephone
company and the other end into
the LINE jack on the back side
of the machine.
(Refer to the Dialing Method.
See page 128.)