Connecting The Cable - Panasonic DP-2310 Operating Instructions Manual

[For DP-3510/4510/6010]
LINK Lamp
Illuminates when connected to the LAN.
Lamp will not turn ON if LAN cable is defective
(contains breaks).
LAN Connection Jack
(10Base-T/100Base-TX)
LAN Cable
(10Base-T/100Base-TX Cable)
Insert the plug until a click is heard.
(LAN cable is not included with the product.)
Purchase a Category 5 Cable, compliant with
EIA/TIA 568-A-5 standard.
10Base-T/100Base-TX Ethernet Hub
NOTE
16
Getting to Know Your Machine

Connecting the Cable

Telephone Line Jack
Plug one end of the
telephone line cable into
the telephone
jack supplied by the
telephone company and
the other end into the LINE
jack on the left side of the
machine. (Refer to
the Dialling Method.
See page 126.)
External Telephone Jack
You can connect an
additional standard single
line telephone to the
machine. To connect the
telephone, remove the
protective tab on the TEL
jack.
1. The shape of the telephone line cable and power cord may differ depending on the each
country' s regulation or specification.
ACTIVITY Lamp
Blinks when there is data traffic
on the LAN.
Ethernet LAN
(10Base-T/100Base-TX)
Cable (Not included)
Telephone Line
Cable Adapter
Power Switch
After connecting all cables
and the Power Cord, turn the
Main Power Switch on the Back
and the Power Switch
on the Left Side of the machine
to the ON position.
Telephone Jack