Setting Rcv To Memory; Receive To Memory - Panasonic DP-8025 Operating Instructions Manual

Receive To Memory

Setting RCV To Memory

Make sure that the FAX/EMAIL lamp is ON. If not, press
1
2
3
4
NOTE
84
MODE SETTING
SELECT MODE RECEIVE TO MEMORY
ON
OK
1. When the memory overflows, the machine will stop receiving, and release the line. The
machine will not answer the next incoming call until there is space available in memory.
2. We recommend that optional flash memory card is installed when this function is used. See
page 223 on Image Memory Capacity.
MMM-dd-yyyy 15:00
Ready To Fax
DEFERRED POLLING/ SELECT
BASIC MENU
COMM. ADV.COMM. MODE
MEMORY DIRECT
LETTER
2-SIDED
X-STAMP
ORIGINAL
COMPLETION
COMM.STATUS
NOTICE
FILE TYPE
GET EMAIL
AND NAME
MMM-dd-yyyy 15:00 0%
Ready To Fax
Receive To Memory
AFRICA AMERICA
APOLLO ASIA
BRAZIL
to select the "FAX/EMAIL" mode.
0%
EDIT FILE
PRINT OUT
MODE
STD
TEXT
Receive To Memory
Select A Function
Receive To Memory
Select A Function
ANTARTICA
BERLIN
MEMORY XMT
ADDRESS BOOK
600dpi
FINE S-FINE
LIGHTER DARKER
TEXT/PHOTO PHOTO