Troubleshooting - Outback TROOPER 359 Assembly And Operating Instructions Manual

K. Troubleshooting
Problem
Burners will not light using the
ignition system
Burner will not light with a match
Low flame or flashback (fire in burner
tube— a hissing or roaring noise may
be heard)
Gas valve knob difficult to turn
Possible Cause
LP gas cylinder is empty
Faulty regulator
Obstructions in burners
Obstructions in gas jets or gas hose
Electrode wire is loose or disconnected on
electrode or ignition unit
Electrode or wire is damaged
Faulty integral ignitor
LP gas cylinder is empty
Faulty regulator
Obstructions in burners
Obstructions in gas jets or gas hose
LP gas cylinder too small
Obstructions in burners
Obstructions in gas jets or gas hose
Windy conditions
Integral ignition system jammed
Gas valve jammed
For reference and correspondence, record your serial number
here.(See sticker on side of barbecue body.)
Serial No.
__________________
This number may be required when ordering spare parts or
accessories. A part reference number may also be required
where applicable.
16
Solution
Replace with full cylinder
Have regulator checked or replace
Clean burners
Clean jets and gas hose
Reconnect wire
Change electrode and wire
Change ignitor
Replace with full cylinder
Have regulator checked or replace
Clean burners
Clean jets and gas hose
Use larger cylinder
Clean burners
Clean jets and gas hose
Use BBQ in a more sheltered position
Replace gas valve
Replace gas valve
Published September 2006'