How To Use The Hob Burners; Lighting Of The Hob Burners; Electric Ignition - Caple CR 9201 Instruction Manual

Hob burners
Each hob burner is controlled by a sep-
arate gas tap operated by a control knob
(fig. 4.3) which has 3 positions marked
on the knob, these are:
– Symbol
– Symbol
– Symbol
Push in and turn the knob anti-clockwise
to the selected position.
To turn the burner off, fully rotate the knob clockwise to the off position:
The maximum setting of the control tap is for boiling, the minimum setting is for slow
cooking and simmering.
All working positions must be chosen between the maximum and minimum setting,
never between the maximum setting and the "OFF" position.

Lighting of the hob burners

To ignite the burner, the following instructions are to be pursued:
1) Lightly press and turn the knob anti-clockwise, and make the symbol
on the knob to mach with the indicator on the control panel (fig. 4.3).
2) Press the knob to operate the electric ignition; or, in case of power cut, approach
a flame to the burner.
3) Adjust the burner according to the power required.

Electric ignition

The sparks generated by the electrodes close to the burners will ignite the chosen
burner. Whenever the lighting of the burners will result difficult due to peculiar conditions
of the gas features or supply, it is advised to repeat the ignition with the knob on "min-
imum" position.
18

How To Use the Hob Burners

: tap closed (burner off)
: High (maximum)
: Low (minimum)
Fig. 4.3
.
printed