Conversion To Lpg; Conversion Procedure; Injectors Replacement - Caple CR 9201 Instruction Manual

Conversion to LPG

Conversion procedure

INJECTORS REPLACEMENT

Select the injectors to be replaced according to the "Table for the choice of the injec-
tors" (page 15).
To replace the injectors:
– Remove the gratings, the burners and the covers;
– Using a wrench, substitute the nozzle injectors "J" (fig. 3.4a - 3.4b) with those most
suitable for the kind of gas for which it is to be used.
The burners are conceived in such a way so as not to require the regulation of the
primary air.
J
J
Fig. 3.4b
Fig. 3.4a
13