Advertisement
SWITCH LOCK
See Figure S.
The switch trigger can be locked in the OFF position.This
feature can be used to prevent the possibilityof accidental
starting when not in use. To lookswitch trigger, place the
direction of rotation selector (ForWard/ReverseSelector)
in center position.Note: When selector is in centar
position,switch trigger is locked,
SELECTOR WITH
CENTER LOCK POSITION
REVERSE
KEYLESS CHUCK
See Fi#ure 6.
Your drillh_ a keylesschuck.ASthe name implies,you can
handtightenor release ddllbitsin the chuckjaws, Grasp and
holdthe collarofthe chuckwith one hand. Rotatethe chuck
"body withyourotherhand. The an'oweon the chuck
indicatewhichdirectionto rotatethe chuckboclyin orderto
LOCK (t_ghten) o r UNLOCK (release) the drillbit,
DRILLsn"
UNLOCK
CHUCK
(RELEASE)
COLLAR
f
. SWITCH
TRIGGER
FORWARD
Fig. 5
A
WARNING:
Battery tools are always in operating
condition. Therefore, switch should always be locked
when not in use or carrying at your side.
REVERSIBLE
See F_gum
This tool has the feature of being reversible. The direction
of rotation is controlledby a selector located above the
switchtrigger. With the drill held in normal operating
position,the direction of rotation selector shouldbe
positionedto the left of the switch for drilling.The drilling
direction is reversed when the selector is to the right of
the switch, When the selector is in center position,the
switch trigger is locked.
_l,
CAUTION:
To prevent gear damage, always allow
chuck to come to a complete stop before changing
the direction of rotation.
To stop, release switch trigger and allow the chuckto come
to a complete stop.
CHUCKJAWS
LOCK
CHUCK
(_GHTEH)
BODY
Fig. 6
_
WARNING:
Do not hold chuck body with one hand
and use power of the drill to tighten chuck jaws on
drill bit. Chuck body could slip in your hand or your
hand could slip and come in contact with rotatingdrill
•
bit. This could cause an accident resulting in serious
personalinjuPf.
11
Advertisement
