Download Print this page

Advertisement

Operator's
Manual
1/2 in., 19.2 VOLT CORDLESS
DRILL-DRIVER
Variable Speed / Reversible
Model No.
315.114850
WARNING:
To reduce the risk of
injury, the user must read and understand
the operator's manual before using this
product.
Customer
Help Line: 1-800-932-3188
Sears, Roebuck
and Co., 3333 Beverly
Rd., Hoffman
Estates,
IL 60179 USA
Visit the Craftsman web page: www.sears.com/craftsman
983000-464
2-04
Save this manual for future
reference
0Qus

Advertisement

   Also See for CRAFTSMAN 315.114850

   Summary of Contents for CRAFTSMAN 315.114850

  • Page 1

    Customer Help Line: 1-800-932-3188 Sears, Roebuck and Co., 3333 Beverly Rd., Hoffman Estates, IL 60179 USA 0Qus Visit the Craftsman web page: www.sears.com/craftsman 983000-464 Save this manual for future reference 2-04...

  • Page 2

    Exploded View And Repair Parts List ..........................• Parts Ordering / Service ..............................FULL ONE YEAR WARRANTY ON CRAFTSMAN 1/2 in. CORDLESS DRILL-DRIVER If this CRAFTSMAN 1/2 in. Cordless Drill-Driver fails to give complete satisfaction within one year from the date of pur- chase, RETURN IT TO THE NEAREST SEARS STORE OR SEARS SERVICE CENTER IN THE UNITED STATES, and Sears will repair it, free of charge.

  • Page 3

    • Remove adjusting keys or wrenches before turning WARNING: READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instructions the tool on. A wrench or a key that is left attached to a rotating part of the tool may result in personal injury. listed below, may result in electric shock, fire and/or serious personal injury.

  • Page 4

    SERVICE • When servicing a tool, use only identical replacement parts. Follow instructions in the Maintenance section • Toolservice must be performed only by qualified repair of this manual. Use of unauthorized parts or failure to personnel. Service or maintenance performed by un- follow Maintenance Instructions may create a risk of qualified personnel may result in a risk of injury.

  • Page 5

    • Do not let gasoline, oils, petroleum-based products, etc. _IL WARNING? Read and understand all instructions. Failure to follow all instructions listed below, may come in contact with plastic parts. They contain chemicals result in electric shock, fire and/or serious peronal that can damage, weaken, or destroy plastic.

  • Page 6

    Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpreta- tion of these symbols will allow you to operate the tool better and safer. SYMBOL NAME DESIGNATION/EXPLANATION Volts Voltage Amperes Current Hertz Frequency (cycles per second)

  • Page 7

    The following signalwordsand meaningsare intendedto explainthe levelsof risk associatedwith this product. SYMBOL SIGNAL MEANING Indicates an imminently hazardous situation, which, if not avoided, will DANGER: result in death or serious injury. Indicates a potentially hazardous situation, which, if not avoided, could WARNING: result in death or serious injury.

  • Page 8

    SPECIFICATIONS Chuck ................................1/2 in. Keyless Motor ................................... 19.2 Volt DC Switch ................................Variable Speed Gear Train ................................... 2 Speed No Load Speed ............................0-400/0-14g0/min. Clutch .................................. 24 Positions Charger Input ............................120 V. 60 Hz, AC only Charge Rate ................................. 1 Hour Torque ..................................

  • Page 9

    TWO-SPEED LEVEL GEAR TRAIN (HI-LO) TORQUE ADJUSTMENTRING KEYLESS CHUCK LEVEL REARVIEW DIRECTIONOF ROTATION SELECTOR (FORWARD/REVERSE) SWITCH TRIGGER STORAGE SCREWDRIVER BITS BATTERY PACK BATTERY PACK SHOWNIN CHARGER 4-1/2 in. WRIST STRAP CHARGER RED LEDON INDICATES FASTCHARGING MODE GREENLED ONAFTERFASTCHARGING CYCLE, INDICATESFULLYCHARGED BATTERYPACK A ND IN TRICKLECHARGE MODE.

  • Page 10

    INSTRUCTIONS PACKING LIST 112 in. Drill When unpacking the tool: • Carefully remove the tool and accessories from the 1 Hour Charger box. Battery Pack (2) • Make sure that all items listed in the packing list are Double-ended Bit (2) included.

  • Page 11

    LED FUNCTIONS OF CHARGER WARNING: Do not allow familiarity with tools make you careless. Remember that a careless fraction of a LED WILL BE ON TO INDICATE STATUS OF second is sufficient to inflict severe injury. CHARGER AND BATTERY PACK: •...

  • Page 12

    SWITCH TO INSTALL BATTERY PACK See Figure 2. • Lock switch trigger on your drill by placing the direction To turn your drill ON, depress the switch trigger. To turn it of rotation selector in center position. See Figure 5. OFF, release the switch trigger.

  • Page 13

    SWITCHLOCK KEYLESS CHUCK See Figure 5. See Figure 6. The switch trigger can be locked in the OFF position. This Your drill has a keyless chuck. As the name implies, you feature can be used to prevent the possibility of accidental can hand tighten or release drill bits in the chuck jaws.

  • Page 14

    INSTALLING BITS REMOVING BITS See Figure 7. See Figure 7. • Lock the switch trigger by placing the direction of • Lock the switch trigger by placing the direction of rotation selector in center position. See Figure 5. rotation selector in center position. See Figure 5. •...

  • Page 15

    LEVEL BIT STORAGE See Figure 10. When not in use, bits provided with your drill can be placed in the storage area located on the bottom of your drill as shown in figure 10. SCREWDRIVER BIT STORAGE AREA Fig. 1 O WARNING: Always wear safety goggles or safety glasses with side shields when operating tools.

  • Page 16

    CHUCK REMOVAL • Insert hex key in chuck and tighten chuck jaws se- curely. Tap sharply with a mallet in a counterclockwise See Figures 13, 14, and 15. direction. This will loosen chuck on the spindle. It can • Lock the switch trigger by placing the direction of rota- now be unscrewed by hand.

  • Page 17

    Do not abuse power tools. Abusive practices can damage WARNING: When servicing, use only identical tool as well as workpiece. Craftsman replacement parts. Use of any other part may create a hazard or cause product damage. Only the parts shown on parts list, page 19, are intended to be repaired or replaced by the customer.

  • Page 19

    CRAFTSMAN 1/2 in., 19.2 VOLT CORDLESS DRILL-DRIVER - MODEL NO. 315.114850 The model number will be found on a plate attached to the motor housing. Always mention the model number in all correspondence regarding your 1/2 in., 19.2 VOLT CORDLESS...

Comments to this Manuals

Symbols: 0
Latest comments: