3/8 in. professional cordless drill driver variable speed/reversible (21 pages)
Summary of Contents for Craftsman 315.114630
• Operation understand the operator's manual before • Maintenance using this product. • Parts List Customer Help Line: 1-800-932-3188 Sears, Roebuck and Co., 3333 Beverly Rd., Hoffman Estates, IL 60179 Visit the Craftsman web page: www.sears.com/craftsman 983000-318 7-03...
Exploded View And Repair Parts List .......................... • Parts Ordering / Service ............................... FULL ONE YEAR WARRANTY ON CRAFTSMAN 3/8 in. CORDLESS DRILL-DRIVER If this CRI_FTSMRN3/8 in. Cordless Drill-Driver fails to give complete satisfaction within one year from the date of pur- chase, RETURN IT TO THE NEAREST SEARS STORE OR SEARS SERVICE CENTER IN THE UNITED STATES, and Sears will replace it, free of charge.
• Do not overreach. Keep proper footing and balance WARNING: Read and understand all instruc- at all times. Proper footing and balance enable better tions. Failure to fellow all instructions listed below, control of the tool in unexpected situations. may result in electric shock, fire and/or serious personal injury.
SERVICE • When servicing a tool, use only identical replace- • Tool service must be performed only by qualified ment parts. Follow instructions in the Maintenance repair personnel. Service or maintenance performed section of this manual. Use of unauthorized parts or failure to follow Maintenance Instructions may create a by unqualified personnel could result in a risk of injury, risk of shock or injury.
c. That wire size is large enough for AC ampere _ILWARNING: Read and understand all instructions. rating of charger as specified below: Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal Cord Length (Feet) 100' injury.
Important:Some ofthefollowing symbols m aybeused onyourtool.Please study themandlearn theirmeaning. Proper interpretation of thesesymbols w illallowyoutooperate thetoolbetter andsafer. SYMBOL NAME DESIGNATION/EXPLANATION Volts Voltage Amperes Current Hertz Frequency (cycles per second) Minutes Time Alternating Current Type or a characteristic of current -'='= Direct Current Type or a characteristic of current...
Clutch ............. 24 Positions Chuck ............3/8in. Keyless Motor .............. 15.6VoltDC Charger I nput......... 120V, 60Hz,AConly ChargeRate ............3-6Hours Switch............Variable Speed Torque ..............110in.lb. GearTrain............. 1 Speed NoLoadSpeed ..........0-600/min. KNOWYOUR DRILL-DRIVER FORWARD/REVERSE SELECTOR See Figure 1. (DIRECTION OF ROTATION SELECTOR) Your drill-driver has a forward/reverse selector located Before attempting to use your drill-driver, familiarize...
LEVEL TORQUE KEYLESS ADJUSTMENT CHUCK RING REARVIEW DIRECTIONOF ROTATIONSELECTOR (FORWARD/REVERSE) SWITCH STORAGE TRIGGER SCREWDRIVER BITS BATTERYPACKSHOWN IN CHARGINGSTAND CHARGER BATTERYPACK SHOWNINTOOL WRISTSTRAP RED LIGHT (LED) CHARGERSTAND Fig. I...
light indicates the charger is operating properly. It will WARNING: Always wear safety goggles or safety glasses with side shields when operating tools. remain on until battery pack is removed from charging Failure to do so could result in objects being thrown stand or charger is disconnected from power supply.
SWITCH TO INSTALL BATTERY PACK See Figure 2. • Lock switch trigger on your drill by placing the direction To turn your drill ON, depress the switch trigger. To turn it of rotation selector in center position. See Figure 4. OFF, release the switch trigger.
SWITCH LOCK KEYLESS CHUCK See Figure 4. See Figure 5. The switch trigger can be locked in the OFF position. This Your drill has a keyless chuck. As the name implies, you can feature can be used to prevent the possibility of accidental hand tighten or release drill bits in the chuck jaws.
INSTALLINGBITS REMOVING BITS See Figure 6. See Figure 6. • Lock the switch trigger by placing the direction of • Lock the switch trigger by placing the direction of rotation selector in center position. See Figure 4. rotation selector in center position. See Figure 4. •...
BIT STORAGE DRILLING See Figure 9. See Figure11. When not in use, bits provided with your drill can be placed in the storage area located on the bottom of your drill as shown in Figure 9. SCREWDRIVER BITS STORAGEAREA Fig. 9 d_k WARNING: Always wear safety goggles or safety glasses with side shields when operating tools.
CHUCK REMOVAL • Insert hex key in chuck and tighten chuck jaws se- curely. Tap sharply with a mallet in a counterclockwise See Figures 12, 13, and 14. direction. This will loosen chuck on the spindle. It can The chuck must be removed in order to use some now be unscrewed by hand.
Do not abuse power tools. Abusive practices can WARNING: When servicing, use only identical Craftsman replacement parts. Use of any other part damage toot as well as workpiece. may create a hazard or cause product damage. Only the parts shown on parts list, page 17, are intended to be repaired or replaced by the customer.
CRAFTSMAN 318 in., 15.6 VOLT CORDLESS DRILL-DRIVER MODEL NO. 315.114630 The model number will be found on a plate attached to the motor housing. Always mention the model number __ in all correspondence regarding your 3/8 in. CORDLESS DRILL-DRIVER or when orde_...
Get it fixed, at your home or ours! Your Home For repair-in your home-of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it! For the replacement parts, accessories owner's manuals that you need to do-it-yourself.