Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Craftsman Manuals
  4. Cordless driver drill
  5. 315.113340
  6. Operator's manual

Craftsman 315.113340 Operator's Manual

1/2 in., 18 volt cordless drill-driver
Hide thumbs

Advertisement

Quick Links

Download this manual
Operator's Manual
1/2 in., 18 VOLT CORDLESS
DRILL-DRIVER
Variable Speed / Reversible
Model No.
315.113340
Ryobi
Save this manual for
future reference
_k CAUTION:
Read and follow all
Safety Rules and Operating
Instructions
before first use of *[his product.
Customer
Help Line: 1-800-932-3188
Sears,
Roebuck
and Co., 3333
Beverly
Rd., Hoffman
Estates,
IL 60179
USA
Visit the Craftsman
web pago: www.sears.com/craftsman
972000-962
1-02
• Safety
• Features
• Operation
• Maintenance
• Parts List
0( 0s

Advertisement

loading

Related Manuals for Craftsman 315.113340

Summary of Contents for Craftsman 315.113340

  • Page 1 Safety Rules and Operating Instructions • Maintenance before first use of *[his product. • Parts List Customer Help Line: 1-800-932-3188 Sears, Roebuck and Co., 3333 Beverly Rd., Hoffman Estates, IL 60179 0( 0s Visit the Craftsman web pago: www.sears.com/craftsman 972000-962 1-02...
  • Page 2 • Parts Ordedng / Service ............................... FULL ONE YEAR WARRANTY ON CRAFTSMAN 1/2 In. CORDLESS DRILL-DRIVER If this CRRFTSNRN1/2 in, Cordless DrilFDdver fails to give complete satisfaction within one year from the date of pur- chase, RETURN IT TO THE NEAREST SEARS STORE OR SEARS SERVICE CENTER IN THE UNITED STATES, and Sears will repair it, free of charge.
  • Page 3 Your drill-driver has many features for making your drilling _IL CAUTION: Carefullyread through this entire operations more pleasant and enjoyable. Safety, operator'smanualbefore using your new drilL-driver. Pay close attention to the General Safety Rules, performanceand dependabilityhave been given top Spedllc Safety Rules and Symbols, Warnings end pdorityin the design of this drill-drivermakingit easy to Cautions.
  • Page 4 Tool Use and Care • Maintain tools with care. Keep cutting tools sharp • Use clamps or other practical way to secure and and clean. Properly maintained tools, with sharp support the workplace to a stable platform. Holding cuttingedges are less likelyto bind and are easier to the work by hand or against your body is unstable and control.
  • Page 5 • DO nat operate charger with a damaged cord or ,_WARNING: Never use a battery that has been dropped or received a sharp blow. A damaged battery plug. If damaged, have replaced Immediately by a is subjectto explosion. Properly dispose of a dropped qualified servioegl_n.

  • Page 6: Safety Alert Symbol

    .Important: Some of the followingsymbolsmay be used on yourtool. Please studythem and learn their meaning.Proper interpretationof these symbolswill allow you to operate the tool better and safer. SYMBOL NAME DESIGNATION/EXP LANATION Volts Voltage Amperes Current Hertz Frequency (cycles per second) rain Minutes Time...
  • Page 7 400 in./Ibs DRILL-DRIVER 315.113340 Maximum Torque Chuck 1/2in.Keytess Item No. 9 11041 CHARGER (1425301) Motor DCMotor 1 8Volt Rating 120 V, 60 Hz, AC only Gear Train Two Speed Charging Voltage 7.2 - 24 Volt No Load Speed 0-350 RPM (Low) 0-1300 RPM (High) Charge Rate 1 Hour...
  • Page 8 TWO-SPEED LEVEL GEAR TRAIN (HI-LO) TORQUE KEYLESS ADJUSTMENT CHUCK RING REAR VIEW DIRECTION O F ROTATION SELECTOR (FORWARD/REVERSE) STORAGE SCREWDRIVER BATTERYPACK SHOWNINTOOL BATTERY PACK SHOWNINCHARGER 4-1/2in. WRIST STRAP CHARGER RED LED ONIN_CATES MOD£ GREENLED ON AFTER FAST CHARGING CYCLE,INDICATESFULLYCHARGEDBATTERY PACK AND IN TRICKLECHARGE MODE. YELLOWAND GREENLEDSON INDICATESDEEPLY DISCHARGEDOR DEFECTIVEBATTERYPACK.

  • Page 9: Led Functions

    LED FUNCTIONS OF CHARGER WARNING: DOnot allow familiaritywith yourdrill- LED WILL BE ON TO INDICATE STATUS OF driver to make you careless. Remember that a careless fraction of a second is sufficientto inflict CHARGER AND BATrERY PACK: severe injury, • Red LED on = Fast chargingmode.
  • Page 10 SWITCH INSTALL BA'I-rERY PACK ,Fee Figure 2. • Lock switch triggeron your drillby placingthe direction of rotationselectorin center position. See F/#uFe5. To turn your drill ON, depress the switch trigger. To turn it OFF, release the switch trigger. • Place battery pack in yourdrill, Align raised rib on battery pack with groove inside drll{, See F3_'Ure 4.

  • Page 11: Switch Lock

    SWITCH LOCK KEYLESS CHUCK See Figure S. See Fi#ure 6. The switch trigger can be locked in the OFF position.This Your drillh_ a keylesschuck.ASthe name implies,you can feature can be used to prevent the possibilityof accidental handtightenor release ddllbitsin the chuckjaws, Grasp and holdthe collarofthe chuckwith one hand.
  • Page 12 INSTALLING BITS REMOVING BITS See Figure 7. See Fi#ure 7. Lookthe switch trigger by placing the directionof • Lockthe switchtdgger by placingthe direction of rotationselector in center position.See F_um 5, rotationselector in center position.See Figure 5. • Open or close chuck jaws to a point where the open- •...
  • Page 13 BIT STORAGE Bee Figure 10. When not in use, bits provided with your drillcan be LEVEL placed in the storage area located on the bottomof your drill as shown in Figure 10. SCREWDRIVER STORAGE AREA Fig. I0 WARNING: Always wear safety gogglesor safety glasses with side shieldswhen operating t_ols.
  • Page 14 • Insert hex key in chuck and tighten chuck jaws se- CHUCK REMOVAL curely. Tap sharply with e mallet in a counterclockwise See Figures 13, 1#, and 15. direction. This will loosen chuck on the spindle. It can The chuck must be removed in order to use some now be unscrewed by hand.
  • Page 15 WARNING: When servicing, use only Identical damage tool as well as workplace. Craftsman replacement parts. Use of any other part may create a hazard or cause productdamage. Only the parts shown on parts list. page 17, are intended to be repaired or replaced by the customer. All other parts Avoid using solvents when cleaning pJastic parts.

  • Page 17: Parts List

    CRAFTSMAN 1/2 In., 18 VOLT CORDLESS DRILL-DRIVER - MODEL NO. 315.113340 in all correspondence regarding your 1/2 in., 18 VOLT CORDLESS DRILL-DRIVER or when ordering repair The model number will be found on a plate attached to the motor housing. Always mention the model number parts.
  • Page 18 G:et it , ,,, For repair of major brand appliarlces in your own home... no matter who made it, no matter who sold it! 1-800-4-MY-HOM E sMAnytime, dayornight (1-800469.-4663) WW_N.seRrs.COITI To bring in products such as vacuums, lawn equipment and electronics for repair, call for the location of your nearest Sears Parts &...