Advertisement
KNOW YOUR
DRILL-DRIVER
See Figure 1.
Before attempting to use your drill-driver, familiarize
yourself with all operating features and safety
.requirements.
_i
WARNING:
Carefully read through this entire owner's
manual before using your new drill-driver.Pay close
attention to the Rules For Safe Operation, Warnings
and Cautions. If you use your drill-driverproperly and
only for what it is intended, you will enjoy years of safe,
reliable service.
_,
WARNING:
Do not allow familiarity with your driU-
driver to make you careless. Remember that a care-
less fraction of a second is sufficientto inflict severe
injury.
KEYLESS CHUCK
Your drill-driverhas a keyless chuck that allows you to hand
tighten or release drill bit in the chuck jaws.
SWITCH
To turn your drill-driver ON, depress the switch trigger.
Release switch trigger to turn your drill-driver OFF.
SWITCH LOCK
The switch trigger can be locked in the OFF position. This
feature helps reduce the possibility of accidental starting
when not in use.
VARIABLE
SPEED
This tool has a variable speed switch that delivers higher
speed with increased trigger pressure. Speed is controlled
by the amount of switch trigger depression.
TWO SPEED GEAR TRAIN
Your drill-driver has a two speed gear train designed for
drilling or driving at HI or LO speeds. A slide switch is
located on top of your drill to select either HI or LO speed,
FORWARD/REVERSE
SELECTOR
(DIRECTION
OF ROTATION SELECTOR)
Your driU-driver has a forward/reverse selector located
above the switch trigger.
WRIST
STRAP
A wrist strap is provided to reduce the chances of dropping
your drill-driver. Place one hand through the wrist strap
when carrying tool.
WARNING:
If any parts are missing, do not operate
your drill-driveruntil the missing parts are replaced.
Failure to do so could result in possible serious
personal injury.
PRODUCT
SPECIFICATIONS:
DRILL-DRIVER
315.273980
Chuck
Motor
Gear Train
Switch
No Load Speed
Clutch
Maximum Torque
CHARGER
Input
Charging Voltage
Charge Rate
BATTERY
PACK
3/8 in. Keyless
DC Motor 9.6 Volts
Two Speed
Variable Speed
0-300 RPM (Low)
0-1000 RPM (High)
24 Positions
230 in./Ibs.
ITEM NO. 9-11040
(981399-001
)
120 V, 60 Hz, AC only
9.6 - 24 Volts
1 Hour
ITEM NO,
_-11019
(982390-001)
Advertisement
