Advertisement
SWITCH LOCK
See Figure 4.
The switch trigger can be locked in the OFF position. This
feature can be used to prevent the possibility of accidental
starting when not in use. To lock switch trigger, place the
direction of rotation selector (Forward/Reverse Selector)
in center position.
SELECTOR WITH
CENTER LOCK POSITION
REVERSE
KEYLESS CHUCK
See Figure 5.
Your drill has a keyless chuck. As the name implies,you can
handtighten or release drillbits in the chuckjaws. Grasp and
holdthe collarof the chuck withone hand. Rotate the chuck
bodywith yourother hand.The arrowson the chuck
indicate whichdirectionto rotatethe chuck body in orderto
LOCK (tighten)or UNLOCK (release) the drillbit.
UNLOCK
DRILLBIT
(RELEASE)
CHUCK COLLAR
FORWARD
SWITCH TRIGGER
Fig. 4
_k
WARNING:
Battery tools are always in operating
condition. Therefore, switch should always be locked
when not in use or carrying at your side.
REVERSIBLE
See Figure 4.
This tool has the feature of being reversible.
The direction
of rotation is controlled
by a selector located above the
switch trigger. With the drill held in normal operating
position, the direction of rotation selector should be
positioned
to the left of the switch for drilling. The drilling
direction
is reversed when the selector
is to the right of
the switch. When the selector is in center position, the
switch trigger is locked.
_k
CAUTION:
To prevent gear damage, always allow
chuck to come to a complete stop before changing
the directionof rotation.
To stop, release switch trigger and allow the chuck to come
to a complete stop.
CHUCK JAWS
LOCK
(TIGHTEN)
CHUCK BODY
Fig. 5
_
WARNING:
Do not hold chuck body with one hand
and use power of the drill to tighten chuck jaws on
drill bit. Chuck body could slip in your hand or your
hand could slip and come in contact with rotatingdrill
bit. This could cause an accident resulting in serious
personal injury.
11
Advertisement
