3/8 in. cordless drill-driver variable speed / reversible (18 pages)
Summary of Contents for Craftsman 315.114450
• Operation before using this product. • Maintenance Customer Help Line: 1-800-932-3188 Sears, Roebuck and Co., 3333 Beverly Rd., Hoffman Estates, IL 60179 USA Visit the Craftsman web page: www.sears.com/craftsman 983000-354 7-03...
FULL ONE YEAR WARRANTY ON CRAFTSMAN 3/8 in. CORDLESS DRILL-DRIVER If this I:llRF'r$14RH Cordless Drill-Driver fails to give complete satisfaction within one year from the date of purchase, RETURN IT TO THE NEAREST SEARS STORE OR SEARS SERVICE CENTER IN THE UNITED STATES, and Sears will repair it, free of charge.
• Do not overreach. Keep proper footing and balance WARNING: Read and understand all at all times. Proper footing and balance enable better instructions. Failure to fellow all instructions listed control of the tool in unexpected situations. below, may result in electric shock, fire and/or serious personal injury.
SERVICE • When servicing a tool, use only identical replace- ment parts. Follow instructions in the Maintenance • Tool service must be performed only by qualified section of this manual. Use of unauthorized parts or repair personnel. Service or maintenance performed failure to follow Maintenance Instructions may create a by unqualified personnel may result in a risk of injury.
c. That wire size is large enough for AC ampere WARNING: Read and understand all instruc- rating of charger as specified below: tions. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious Cord Length (Feet) 100' personal injury.
Important:Some ofthefollowing symbols m aybeusedonyourtool.Please study themandlearn theirmeaning. Proper interpretation of thesesymbols willallowyoutooperate thetoolbetterandsafer. SYMBOL NAME DESIGNATION/EXPLANATION Volts Voltage Amperes Current Hertz Frequency (cycles per second) Minutes Time "X, Alternating Current Type or a characteristic of current --'=- Direct Current Type or a characteristic of current No Load Speed...
0-600/min. SPECIFICATIONS No Load Speed Clutch 24 Positions Chuck 3/8 in. (10 mm) Keyless Charger Input 120 V, 60 Hz, AC only Motor 14.4 Volt DC 3-6 Hours Charge Rate Switch Variable Speed Maximum 100 in.lb. Torque Gear Train One Speed VARIABLE SPEED Before using this tool, familiarize yourself with all operating...
INSTRUCTIONS ,_ WARNING: If any parts are missing do not operate the tool until When unpacking the drill: the missing parts are replaced. Failure to do so could • Carefully remove the tool and accessories from the box. result in possible serious personal injury. •...
WARNING: Always wear safety goggles or safety WARNING: Battery tools are always in operating glasses with side shields when operating this toot. condition. Therefore, switch should always be locked Failure to do so could result in objects being thrown when not in use or carrying at your side. into your eyes, resulting in possible serious injury.
TO INSTALL BATTERY PACK REVERSIBLE See Figure 4. See Figure 3. • Lock switch trigger on the drill by placing the direction This tool has the feature of being reversible. The direction of rotation selector in center position.See Figure 2. of rotation is controlled by a selector located above the switch trigger.
KEYLESS CHUCK INSTALLING BITS See Figure 7. See Figure 5. • Lock switch trigger on the drill by placing the direction The drill has a keyless chuck. As the name implies, you can of rotation selector in center position. See Figure 2. hand tighten or release drill bits in the chuck jaws.
REMOVINGBITS ADJUSTABLE TORQUE CLUTCH See Figure 7. See Figure 9. • Lock switch trigger or the drill by placing the direction The drill is equipped with an adjustable torque clutch for of rotation selector in center position. See Figure 2. driving different types of screws into different materials.
WARNING: Be prepared for binding or bit WARNING: Always wear safety goggles or safety glasses with side shields when operating tools. breakthrough. When these situations occur, drill has Failure to do so could result in objects being thrown a tendency to grab and kick opposite to the direction of rotation and could cause loss of control when into your eyes, resulting in possible serious injury.
CHUCK REMOVAL TO RETIGHTEN A LOOSE CHUCK See Figures 12, 13, and 14. The chuck may become loose on spindle and develop a The chuck must be removed in order to use some wobble. Periodically check chuck screw for tightness. A accessories.
WARNING: When servicing, use only identical toot as well as workpiece. Craftsman replacement parts. Use of any other part may create a hazard or cause product damage. Only the parts shown on parts list, page 17, are intended to be repaired or replaced by the customer. All other parts Avoid using solvents when cleaning plastic parts.
CRAFTSMAN 318 in., 14.4 VOLT CORDLESS DRILL-DRIVER - MODEL NO. 315.114450 _The model number will be found on a plate attached to the motor housing. Always mention the model | number in all correspondence regarding your 3/8 in., 14.4 VOLT CORDLESS DRILL-DRIVER or when | ordering repair parts.
Your Home For repair-in your home-of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it! For the replacement parts, accessories owner's manuals that you need to do-it-yourself. For Sears professional installation of home appliances and items like garage door openers and water heaters.