Advertisement
Setting
Surface
Controls
Each burner lights automatically
from an electric ignitor each time a control
knob is turned to the LITE position.
To operate
the surface
burner:
1. Place cooking utensil on burner.
2. Push in and turn the Surface Control knob to LITE. Note: All electronic
ignitors will click at the same time. However, only the burner you are turning
on will ignite.
3. Visually check that the burner has lit.
4. After the burner lights, turn the control knob to the desired flame size. The
control knobs do not have to be set at a particular mark. Use the guides and
adjust the flame as needed. DO NOT cook with the control knob in the LITE
position.
(The electronic
ignitor
will continue
to click if left in the LITE
position.)
In the event
of an electrical
power
outage,
the surface
burners
can be lit
manually.
To light a surface
burner,
hold a lit match to the burner
head, then
slowly turn the surface
control
knob to LITE. Use caution
when
lighting
surface
burners
manually.
Do not place plastic items such as salt and pepper shakers,
spoon holders
or plastic wrappings
on top of the range when it is in use.
These items could melt or ignite.
Potholders, towels or wood spoons could
catch fire if placed too close to a flame.
Advertisement
