Advertisement
Setting
the Clock and
Minute
Timer
Note:
The oven function
will not work]
if the time of day clock is not set. /
/
(Figure 2 Only)
To Set the Clock
When the range is first plugged in, or when the power supply to the range has
been interrupted,
the display will flash "12:00".
1. Push CLOCK.
2. Within 5 seconds, push and hold the UP or DOWN ARROW until the correct
time of day appears in the display.
Note: The clock cannot be changed during any timed bake or self-clean
cycle.
To Set the Minute
Timer
1. Push TIMER ON/OFF.
2. Push the UPARROW to increasethetime
in one minute increments. Push and
hold the UP ARROW to increase the time in 10 minute increments. The timer
can beset for anyamount
oftimefrom
1 minuteto
11 hours and 59 minutes.
Note: If you push the DOWN ARROW first, thetimer
will advance to 11 hours
and 59 minutes.
3. The display shows the timer count down
in minutes
until one minute
remains. Then the display will count down in seconds.
4. When the set time has run out, the timer will beep 3 times. It will then
continue to beep 3 times every 60 seconds until TIMER ON/OFF is pushed.
Note:
The minute
timer
does not start
or stop cooking.
It serves as an extra
timer
in the kitchen
that will beep when
the set time
has run out. The minute
timer
can be used alone
or during
any of the other
oven functions.
When the
minute
timer
is in use with
any other
mode, the minute
timer will be shown
in
the display.
To view other
functions,
push the function
pad for that
mode.
To Change
the Minute
Timer
while
it is in use:
While
the timer
is active and shows
in the display,
push and hold the UP or
DOWN
ARROW
to increase
or decrease
the time.
To Cancel the Minute
Timer before
the set time has run out:
Push TIMER ON/OFF.
Advertisement
