Advertisement
Oven Cleaning
(continued)
Use care when
opening 1
the oven door after the self-cleaning /
cycle. Stand to the side of the
oven /
when opening the door to allow hot
air/
or steam to escape.
J
To Start the Self-Clean
Cycle
*We recommend
a 2 hour self-clean cycle for light soils and a 3 hour cycle for
average to heavy soils (to assure satisfactory
results).
To Set the Controls
for a Self-Clean
Cycle:
1. Be sure the clock shows the correct time of day.
2. Push CLEAN. "
" appears in the display.
3. Push the UP ARROW until "3:00" appears in the display for a 3 hour cycle, or
push the DOWN ARROW until "2:00" appears in the display for a 2 hour cycle.
4. As soon as the UP or DOWN ARROW is released, "CLn" appears in the display.
5. As soon as the controls are set, the motor driven lock will begin to close
automatically
and the "LOCK" indicator
light will flash. DO NOT open the
door while the light is flashing (it takes about 15 seconds for the lock to
close).
6. The "LOCK" light will glow until the cleaning cycle is completed or cancelled,
and the oven temperature
has cooled.
When the Self-Clean
Cycle is Completed:
1. The time of day will appear in the display window
and the "LOCK" light will
continue to glow.
2. Once the oven has cooled down for about 1 HOUR and the "LOCK" light has
gone out, the oven door can be opened.
DO
NOT force
the
oven
door
open.
This can damage
the
automatic
door locking
system.
Use caution
when
opening
the door after the
self-cleaning
cycle is completed.
The oven may still be VERY HOT.
15
Advertisement
