Advertisement
Safety
Safety
Bnstructions
Read and follow all safety instructions.
Personal
Safety
nnstructions
1. Wear safety goggles
labeled ANSI Z87.1
(or in Canada CSA Z94.3-99)
on the pack-
age. It means the goggles
meet impact stan-
dards set by the American
National
Standards
Institute.
Regular eyeglasses
are
not safety goggles.
2. Wear close fitting clothes, short sleeved
shirts, and non-slip
shoes. Tie up long hair.
Do not wear gloves, ties, jewelry,
loose cloth-
ing, or long sleeves. These can get caught in
the spinning
blade and pull body parts into
the blade.
3. Wear dust mask to keep from inhaling
fine particles.
4. Wear ear protectors,
plugs or muffs if you
use saw daily.
5. Keep good footing and balance; do not
ove r- reac h.
Work Area Safety Instructions
1. Keep children, pets, and visitors out of
work area; they could be hit by a thrown
workpiece, workpiece chips or pieces of
blade.
2. Turn saw off, remove yellow key, and
unplug before leav'ing work area. Do not
leave until blade has stopped
spinning.
3. Make work area child-proof:
remove yet-
low key to prevent accidental
start-up;
store
key out of sight and reach; lock work area.
4. Keep floors clean and freeof
sawdust,
wax and other slippery
materials.
5. Keep work area well lighted and unclut-
tered.
6. Use saw only in dry area_ Do not use in
wet or damp areas.
\
\
\
Safety Goggles
Dust Mask
Ear Protectors
7
Advertisement
