Advertisement
!ii: Ssembl¥
i
i_:: :_:_:::i::7!i:
_ _e!f_l] _ing:itemsl
can nowbe
removed
.: :: f i:Omlthe!:fr_ _ti!_t; the :_okeas an assembly:
::
:: f:::Bevei spring wedge
g.: Bevel 10ck knob
h. SCrew, pan:head
plastite no. 8 x 3/8"
long ....
8. Remove
the bevel spring wedge from
this assembly
by rotating
shaft support
coun-
te:rclockwise
until it comes out of the square
nut located between
the bevel lock lever and
the bevel spring
wedge. Do not remove any
other items. Remove
Square nut then
remove the bevel spring wedge from the
: bevel lock lever.
be_een
:be_ei:.:_io_k:leverand bevel lock
rear of the bevel lockwedge.
10. Reinstall
the shaft support
assembly
into
the yoke. Make
sure roll pin on the shaft sup-
port fits into the recess
provided
in the yoke;
11. Reinstall
the bevel spring
using the
screw previously
removed.
Make sure the
slot in the bevel spring
is in the groove of the
index pin before tightening.
t2. Reinstall
the yoke cover using the plas-
tite screws: previously
removed or by clipping
back in place;
./
g
22
Advertisement
