Table of Contents
Advertisement
920-087-02
(9-03)
Friedrich PTACAccessories (continued)
MODEL NUMBER
PXSE
PXDA
PXDE
PXFT
DESCRIPTION
SLEEVE EXTENSION RETROFIT KIT G-90 zinc coated
steel, 2.4" sleeve extension attached to the room side of
the sleeve to allow for the installation of a P-Series Friedrich
PTAC in a T-Series sleeve.
LATERAL DUCT ADAPTER Attaches to the PTAC/PTHP
unit and provides a transition to direct up to 35% of the total
CFM to a secondary room, eitherleft or right ofthe unit. Kit
includes duct plenum with discharge grille and internal baffle,
adapter and end cap.
LATERAL DUCT EXTENSION A three foot insulated plenum
that attaches to the left or right side of the duct adapter. The
extension can be cut to length by the installer. Maximum
allowable straight extension is fifteen feet.
REPLACEMENT FILTER PACK These are original
equipment return air filters. They are reusable and can be
cleaned by vacuuming, washing, or blowing out, and are sold
in convenient ten packs. (Two filters per chassis)
PHOTO
PXSE _
/
PXDA
PXFT
[_] :r:T,-_'_ [o]',,;lll[o]_r[,-
"]
DESIGNATOR
DESCRIPTION
S
STANDARD UNIT Standard PTAC/PTHP chassis. Can be 230/208V or 265V, electric or heat pump.
R
REMOTE THERMOSTAT Chassis option necessary for wall mounted thermostat control of the unit.
SEACOAST PROTECTION Additionalprotectionfor PTAC/PTHPunits in a coastalor corrosiveenvironment.
C
The entire outdoor coil is submerged in a spedelly formulated enamel coating, then oven-cured for a tough,
corrosion-resistantfinish.
23
Advertisement
Table of Contents
