Table of Contents
Advertisement
WSE Sleeve/ Exterior Grilles
Standard Grille
Premium, expanded metal
grille with powder coat paint.
Ships with WSE sleeve.
INCORRECT Horizontal Louvers
WSE Wall Sleeve
Ships with standard grille
(shown above) and standard
galvanized steel inner panel
and painted steel outer panel.
Installation Accessories
DK / Drain Kit
Installed at the back of the unit and allows
for attachment to condensate disposal
system,if necessary or desired.
74
AVAILABLE ACCESSORIES
IMPORTANT:
Operating the air conditioner with incorrect rear grille
or without Baffle Adapter Kit (on 19 ¾" deep sleeve)
will recirculate discharge air and cause compressor
overload to trip.
This will cause the unit to shut down temporarily and
may lead to premature compressor failure.
WSE sleeve
IDK / Internal Drain Kit
New construction applications
where a condensate drain sys-
tem has been built into the wall
interior.
Optional Architectural Grille- AG
Premium extruded aluminum
grille.
CORRECT Vertical Louvers
Steel inner panel
BAK / Baffle Adapter Kit
Necessary when install-
ing in a sleeve deeper than
16 ¾" deep, such as Fedders
B sleeve
(19 ¾" deep).
Outer weather panel
Advertisement
Table of Contents
Troubleshooting
