*Installation in Fedders B sleeve requires a baffle kit. See BAK accessory under accessories. Q U A L I T Y WallMaster ® COOLING HEATING 7,800-14,500 BTU/h 7,300-11,000 BTU/h Up to 9.9 EER Friedrich Fedders Sleeve Dimensions WSD Sleeve A Sleeve Height (inches) 16 3/4 16 3/4 Width (inches) Depth (inches)
Page 3
• Stale air exhaust Digital Control Features • 12 hour programmable timer • Money Saver® setting saves money by conserving energy Units are shown without USC sleeve (USC sleeves sold and shipped separately) Friedrich Carrier (51S Sleeve Dimensions Sleeve Amana...
Page 4
ROOM AIR CONDITIONER Blocked side vents restrict air flow FRIEDRICH THRU-THE-WALL Solid-side sleeve (no side vents) can be installed flush with exterior wall.
Page 5
WallMaster 27” Sleeve Exterior Grilles ® WSD Sleeve WSD Sleeve Optional Architectural Grille- AG Standard Grille - Ships with sleeve. Galvanized steel weather panel also ships with sleeve. Installation Accessories (27” sleeve models only) DK / Drain Kit SB / Sub Base Installed at the back of the unit and allows Used as a base for the unit when for attachment to permanent condensate...
Estimated yearly operating cost based on a 2007 national average electricity cost of 10.65 cents per kWh. † The estimated yearly operating cost of this model was not available at the time the range was published. Friedrich Air Conditioning Co. l P.O. Box 1540 l San Antonio, TX 78295-1540 l 800.541.6645 l fax 210.357.4480 www.friedrich.com...
Need help?
Do you have a question about the Uni-Fit US10C10 and is the answer not in the manual?
Questions and answers