Friedrich WALLMASTER TEC Series Specifications

@@®c®
TEC / THC FEATURES
• Super efficient, slim design.
• Cooling efficiencies as high as 11.0 EER.
• Contoured discharge design blends with any decor.
• Large well-spaced switch buttons.
• Easy to read and understand controls.
• Control knob and buttons not removable by the user.
• Flush floor mount capability with recessed front return.
• Lockdown front panel.
• Even-temp heat anticipator temperature control for
maximum comfort.
• Thermostat limiter device.
• Quiet, efficient rotary compressors mounted on vibra-
tion isolators, with internal high temperature overload
protection.
• Indoor and outdoor tangential blower wheels provide
even air distribution.
• Concealed vent control and fan cycle switch.
• Emergency heat compressor override switch on all heat
pumps.
• Up to 420 CFM indoors for maximum air throw.
• Two cooling and two heating fan speeds.
• Slide-out top mount filter for easy cleaning.
• High efficiency, PSC fan motor with permanently
lubricated bearings, built-in thermal protection.
• Isolatedcompressorcompartment.
• Overcurrent protection (fuse) standard on 265 volt units.
• Efficient nichrome wire heater design for long life.
• Draw-through condenser and evaporator coils for easier
cleaning.
• Completelineofaccessories.
Options available:
• Wall mounted remote thermostat
• Central desk control with low temperature protection.
• Seacoast protection.
It mattem!
i "af.,T_j "ai; I'Jlr, t_]_