Fig. 6.15
REPLACING
THE OVEN LIGHT (fig.6.15)
Before any maintenance is started involving electrical parts of the appliance, it must be
disconnected
from the power supply.
- Let the oven cavity and the heating elements cool down;
- Switch off the electrical supply;
- Remove the protective cover (fig. 6.15);
- Unscrew and replace the bulb with a new one suitable for high temperatures
(300°C)
having the following specifications:
120V, 60 Hz, 25W, E14
- Refit the protective cover
NOTE: Oven bulb replacement is not covered by your guarantee
Fig. 6.16
REMOVING
THE OVEN DOOR
The oven door can easily be removed as follows:
- Open the door to the full extent (fig. 6.16a).
- Open the lever "A" completely on the left and right hinges (fig. 6.16b).
- Hold the door as shown in fig. 6.16.
- Gently close the door (fig. 6.16) until left and right hinge levers "A" are hooked to part
"B" of the door (fig. 6.16b)
-Withdraw
the hinge hooks from their location following arrow "C" (fig. 6.16d).
- Rest the door on a soft surface.
- To replace the door, repeat the above steps in reverse order.
A
Fig. 6.16a
Fig. 6.16c
/
/
/
/
Fig. 6.16d
34